2024 Land Pride RCR1248
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCR1248
Product Features
Description
The RCR12 Series Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.
Features and Benefits
- Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- Tractor HP range: 18 - 60 HP
- 3 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Cat. 3 driveline with shearbolt: Shear bolt offers maximum driveline protection.
- Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
- Floating top link: Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.
- Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
- 1 1/4" - 10" Cutting Height: Cutting height for wide range of cutting conditions.
- 1/2" x 3" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
- Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
- 10 Gauge stump jumper: Allows cutter to slide over obstructions protecting the gearbox output shaft.
- Laminated tailwheel: Laminated material is long lasting in rough conditions and can't go flat.
- High blade tip speed: Ensures clean cut.
- Heavy-duty spindle on tailwheel: 1 1/4" spindle gives the strength to protect tailwheel assembly.
- Rubber guarding: Protect against flying debris.
- Metal Guarding: Protects against flying debris.
Specifications & Capacities
- Weight (With front & rear guard, shear bolt driveline & laminated tire): 413 lbs. (187 kg)
- Hitch: Category l (Quick hitch ready)
- Cutting Width: 48" (1.22 m)
- Overall Width: 53 5/8" (1.36 m)
- Overall Lengt (Including Tailwheel): 89 1/8" (2.26 m)
- Cutting Height: 1 1/4" - 10" (3.2cm. - 25.4 cm)
- Deck Height: 7 1/4" (18.4 cm)
- Cutting Capacity: Grass, weeds & light brush
- Recommended Tractor Horsepower: 20-60 hp (14.9-44.7 kw)
- Power Take-Off Speed: 540 rpm
- Gearbox Rating Horsepower: 60 hp (44.7 kw)
- Gearbox (Speed up beveled gears): 1:1.93 Speed-up Cast iron housing
- Deck Construction: 1 Piece reinforced deck
- Gearbox Lubrication & Capacity: 1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L) of gear lube 80-90W EP
- Deck Material Thickness: 12 Gauge (2.7 mm)
- Skids: 12 Gauge (2.7 mm) (Formed in deck)
- Stump Jumper: Round Pan 10 ga x 24" (61.0 cm)
- Blade Bolts: Keyed with harden flat washer and locknut
- Blades (2): 1/2" x 3" (13mm x 76 mm) Heat treated alloy steel Free-swinging blades
- Blade Tip Speed: 13,256 fpm (67.3 mps)
- Driveline: ASAE Category 3
- Driveline Protection Options: 1/2" (13 mm) Center shear bolt protection or center bolt 2 plate slip clutch
- Tailwheel: 4" x 8" Laminated tire and yoke
- Safety Guards: Rubber (standard front and rear)
General
Working Width | 48 in. (1.22 m) |
Width | 53 5/8 in. (1.36 m) |
Length | 89 1/8 in. (2.26 m) |
Weight | 413 lb. (187 kg) |
Recommended HP | 20-60 HP (14.9-44.7 kW) |