2024 Land Pride RCR1242
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCR1242
Product Features
Description
The RCR12 Series Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.
Features and Benefits
- Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- Tractor HP range: 18 - 60 HP
- 3 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Cat. 3 driveline with shearbolt: Shear bolt offers maximum driveline protection.
- Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
- Floating top link: Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.
- Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
- 1 1/4" - 10" Cutting Height: Cutting height for wide range of cutting conditions.
- 1/2" x 3" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
- Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
- 10 Gauge stump jumper: Allows cutter to slide over obstructions protecting the gearbox output shaft.
- High blade tip speed: Ensures clean cut.
- Heavy-duty spindle on tailwheel: 1 1/4" spindle gives the strength to protect tailwheel assembly.
- Laminated tailwheel: Laminated material is long lasting in rough conditions and can't go flat.
- Rubber guarding: Protect against flying debris.
- Metal Guarding: Protects against flying debris.
Specifications & Capacities
- Weight (With front & rear guard, shear bolt driveline & laminated tire): 385 lbs. (175 kg)
- Hitch: Category l (Quick hitch ready)
- Overall Width: 45 1/4" (1.15 m)
- Cutting Width: 42" (1.07 m)
- Overall Lengt (Including Tailwheel): 83" (2.11 m)
- Deck Height: 7 1/4" (18.4 cm)
- Cutting Capacity: Grass, weeds & light brush
- Cutting Height: 1 1/4" - 10" (3.2cm. - 25.4 cm)
- Recommended Tractor Horsepower: 18-40 hp (13.4-29.8 kw)
- Power Take-Off Speed: 540 rpm
- Gearbox (Speed up beveled gears): 1:1.93 Speed-up Cast iron housing
- Gearbox Rating Horsepower: 60 hp (44.7 kw)
- Gearbox Lubrication & Capacity: 1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L) of gear lube 80-90W EP
- Deck Construction: 1 Piece reinforced deck
- Skids: 12 Gauge (2.7 mm) (Formed in deck)
- Deck Material Thickness: 12 Gauge (2.7 mm)
- Stump Jumper: Round Pan 10 ga x 24" (61.0 cm)
- Blades (2): 1/2" x 3" (13mm x 76 mm) Heat treated alloy steel Free-swinging blades
- Blade Tip Speed: 11,417 fpm (58.0 mps)
- Blade Bolts: Keyed with harden flat washer and locknut
- Driveline: ASAE Category 3
- Driveline Protection Options: 1/2" (13 mm) Center shear bolt protection or center bolt 2 plate slip clutch
- Tailwheel: 4" x 8" Laminated tire and yoke
- Safety Guards: Rubber (standard front and rear)
General
Working Width | 42 in. (1.07 m) |
Width | 45 1/4 in. (1.15 m) |
Length | 83 in. (2.11 m) |
Weight | 385 lb. (175 kg) |
Recommended HP | 18-40 HP (13.4-29.8 kW) |