2024 Land Pride RCM4710
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCM4710
Product Features
Description
The RCM4710 is a 10' offset version of our RC4715 Rotary Cutter
Specifications
- Horsepower range: 55-250 hp (41-186.4 kW)
- Gearbox horsepower: 540 rpm or 1000 rpm, 250hp (186.4 kW) Divider and 210hp (156.6 kW) Center & Wing
- Gearbox lubrication: Gear Lube 80-90W EP
- Gearbox oil capacity: Splitter: 3.5 pints (1.66 L); Center deck & Wing: 6 pints (2.84 L)
- Cutting capacity: 4" (10.2 cm)
- Tongue weight: 1,948 lbs (883.6 kg)
- Total Machine weight: 5,160 lbs (2340.5 kg)
- Blade tip speed At 1000 rpm: Center Blades = 16,300 FPM (82.8 mps) & Wing Blades = 16,000 FPM (81.3 mps)
- Hitch types: Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch.
- Hitch jack: Standard (7,000 lbs.) (3175.1 kg)
- Signal lights: LED
- 7 Pin connector: SAE J560 pin configuration
- Cutting width: 10'-0" (4.57 m)
- Overall width: 11'-7" (4.83 m)
- Transport width with 21" tires: 10'-3" (3.12 m) - Single-acting fold option, 7'-3" (2.21 m) - Dual-acting fold option.
- Overall length: 16'-3" (4.95 m) - With center deck raised fully up.
- Deck height: 12" (30.5 cm)
- Cutting height: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
- Lift hydraulics: 3" x 8" (7.6 cm x 20.3 cm) hydraulic cylinder, hoses, fittings & stroke control spacers.
- Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground.
- Wing hydraulics: 2 1/2" x 12" (6.4 cm - 30.5 cm) hydraulic cylinder, hoses & fittings.
- Wing transport protection: Wing Transport Lock Pin
- Deck material thickness: 10 Gauge (3.4 mm)
- Side skirt thickness: 1/4" (6 mm) Steel
- Skid shoes Wing Deck: 1 Replaceable skid shoe.
- Skid shoes Weight Box: 3 Replaceable skid shoes
- Skid shoes Center Deck: 2 Replaceable skid shoes and multiple mounting locations.
- Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift.
- Blade overlap: 6" (15.2 cm)
- Blade bolt: Keyed with hardened flat washer & locknut.
- Stump jumper / blade holder: 3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar.
- Front & rear guards: Optional single row chain or dual row chain.
- Input driveline 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without overrunning clutch.
- Intermediate driveline: Standard - Category 4 with slip-clutch.
- Wheel options: 21" (53.3 cm) or 26" (66 cm) Laminated tires; 24" (61 cm) Used aircraft, foam filled tires; 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic; 29" (73.7 cm) Used aircraft tires
- Wing drivelines: Standard - Category 4 with slip-clutch or Category 5 with slip-clutch.
- Number of wheels: 5 - Wheel option: Four on transport axle and one on wing axle.; 6 - Wheel option: Four on transport axle and two on wing axle.
- Transport axle: Many configurations to choose from.
- Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.
- LP Performance hitch & Bar tite hitch pivot shaft diameter: 2 1/4" (5.7 cm)
- A-frame tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing
Features
- Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
- Factory assembled: Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
- 7 Year gearbox warranty: Shows confidence in gearbox integrity.
- Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
- Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
- Sliding guard for splitter gearbox: Sliding guard offers protection and easy access for improved efficiency of splitter gearbox maintenance.
- 2 Piece driveline shields: Driveline grease zerks are easier to access.
- Low hitch weight on tractor tongue: Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
- Narrow A-frame hitch: Allows for a tighter turning radius.
- Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
- Adjustable driveline hanger: Serves as support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
- Input driveline: Cat. 6 CV Driveline is matched just right for tractor capacity. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
- Drivelines with slip-clutches Cat. 4 intermediate, Cat. 4 or Cat. 5 wing: Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
- Grease zerks on end caps of driveline: Intermediate and wing driveline cross journals are easier to grease.
- High blade tip speed: Allows clean cutting of material.
- 6" Blade overlap: Eliminates skipping during turns.
- Diamond blade bar: Provides the critical strength needed for consistent, top performance.
- 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
- Smooth top design: Reduces accumulation of debris and is easier and faster to clean.
- Tops of decks are 100% welded: Makes center deck and wing deck stronger.
- 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls.
- Multiple center skid shoe locations: Run two or four skid shoes in locations under the tongue pivots or out at the wing hinges.
- Beveled skid shoes on wing and weight box: Reduces gouging the ground when turning.
- LED signal lights: LED lights are bright, long lasting, and resist vibration, unlike incandescent lights.
- Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
- 1" Solid hinge rods: Larger diameter hinge rod provides greater strength in the hinge area.
- Wing transport lock pin: Transport lock pin will hold wing in folded position in the event of hydraulic loss.
- Enclosed dual 1" leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
- 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
- Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
- Spring cushioned center-axle: Protects unit from bumps and ground shock.
- Optional spring cushioned wing-axle: Further improves ride over a multitude of terrains.
- Replaceable individual wheel spindles: Spindles can be replaced when damaged without replacing entire axle assembly.
- Wheel options Laminated tires: Eliminates flats.; Air-filled tires: Give better cushion while transporting.; Foam-filled tires: Give better cushion while transporting and can't go flat.
- LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar up to 12 degrees in both left and right directions.
- Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
- Maintenance free tongue & axle pivots: Self lubricating journal bearings make for less maintenance.
- Color coded hydraulic hose handles: Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
- 4 lip, metal backed wheel hub seal with purging capabilities: Seals make it harder for water & debris to enter the hub and grease to leave the hub. Metal backing prevents sticks and twine from destroying the seal lips.
- Greasable cast steel, continuous hinges: Cast steel hinges make a strong connection & are easy to lubricate.
- Center axle options: Single suspension center axle: Spring cushion at the cylinder for cushion with least amount of moving parts; Independent suspension center axle: Offers additional suspension support per wheel axle; Walking tandem center axle: Designed for versatility over a multitude of terrains; Parallel pivot center axis: provides unmatched ground contact for hill-like terrains.
- Wing axle option: Solid wing axle: One piece wing axle that attains support from cylinder spring cushion on center axle; Independent suspension wing axle: Offers additional suspension support on wing axle.
- Dual-acting fold cylinders (optional): Allows for a narrow transport width of 7'3" (2.21 m).
- Stroke control flip spacers: Easily change cut height with a flip of a spacer.
General
| Working Width | 10 ft. - 0 in. (4.57 m) |
| Width | 11 ft. - 7 in. (4.83 m) |
| Length | 16 ft. - 3 in. (4.95 m) |
| Weight | 5,160 lb. (2340.5 kg) |
| Recommended HP | 55 - 250 HP (41 - 186.4 kW) |
