2024 Land Pride RCM3614
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCM3614
Product Features
Description
The RCM3614 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right of ways, pastures, and set-aside-acres. The 14' cutting width, 2" to 12" cutting height and ability to cut weeds and brush up to 2" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 70-160 HP tractors. The RC3614 and RCM3614 cutters offer Cat. 6 main input drivelines for attachment to 540 rpm or 1000 rpm tractors. They also offer various hitch and tire options making them an excellent choice for agricultural, airport, and municipal mowing applications.
Features
- Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures
- Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer
- 7 Year gearbox warranty (Years 6 & 7 Parts Only): Shows confidence in gearbox integrity.
- 250 hp divider gearbox 130 hp center & wing gearboxes: A rugged heavy-built gearboxes capable of handling heavy-cutting applications.
- Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
- 2" Output gearbox shaft: Large output shaft handles shock loads better
- Input driveline: Cat. 6 CV: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
- Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
- 2 or 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
- High blade tip speed: Allows clean cutting of material & even distribution. See Specifications for actual fpm.
- 6" Blade overlap: Eliminates skipping during turns.
- Good cutting capacity: Can cut brushy areas with saplings up to 2".
- 10 Ga. stump jumper backed with a 1" x 4 1/2" thick blade mounting bar: Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
- 13" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
- Spindle Nut Protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
- 10 gauge smooth deck top : Reduces accumulation of debris and is easier and faster to clean.
- 1/4" side skirt: Reduces debris piercing possibilities.
- Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
- Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
- 1" Solid hinge rods: Larger diameter hinge gives greater strength to cutter and hinge area.
- Wing transport lock: Holds transport wing in the folded-up position in case of hydraulic pressure loss
- Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
- 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
- Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims
- Spring-cushioned center-axle: Protects unit from bumps and ground shock, cushions loads on drawbar.
- Rephasing lift cylinders : Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.
- Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
- 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain
- LP Performance Hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar
- Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear
- LED Signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
- Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting & can't go flat
- Deck rings (optional): Keeps blades from damaging the deck.
Specifications
- Tractor horsepower: 70 to 160 hp
- Gearbox horsepower: 250 hp Splitter, 130 hp Center & Wing
- Gearbox lubrication: Gear Lube 80-90W EP
- Gearbox oil capacity: 5.18 Pints: Divider Gearbox; 6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes
- Cutting capacity: 2"
- Machine weigh with Chain guards, 5 AC tires and standard clevis: Hitch weigh: 2,220 lbs.; Total weight: 5,620 lbs.
- Blade tip speed: 16,500 fpm
- Hitch types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
- Hitch jack: Standard (7,000 lbs.)
- Signal lights: LED
- 7 Pin connector: SAE J5560 pin configuration
- Cutting width: 13' - 6"
- Overall width: 14' - 9 1/4"
- Overall length: 17' - 6" (With cutting height at 2")
- Minimum transport width: 9' - 2 1/2" (With cutting height at 2")
- Deck height: 13"
- Cutting height*: 2" to 12"
- Lift hydraulics: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers; 3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
- Wing folding hydraulics: 3" x 12" single-acting hydraulic cylinder complete with hose & fittings.
- Wing flex: 45 deg. up, 20 deg. down while cutting
- Side skirt material: 1/4" Steel
- Deck material: 1 - Piece, 10 gauge.
- Skid shoes-Wing deck: Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe
- Skid shoes-Center deck: Replaceable: 2 Skid shoes
- Skid shoes-Weight box: Reversible & replaceable: 1 Skid shoe
- 4 Blades (2 per carrier): 1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift.
- Blade overlap: 6"
- Blade bolt: Keyed with hardened flat washer & locknut.
- Stump jumper / blade holder: 10 Gauge round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar.
- Deck ring: Optional 3/8" formed and welded.
- Front & rear guards: Optional single chain or double chain
- Input driveline: ASAE Cat. 6 with constant velocity u-joint
- Intermediate & wing drivelines: Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch
- Tire options: 6" x 9 x 21" Laminated tires; 27" x 7.75" Used aircraft tires with foam filling; 29" x 9" Used aircraft tires without foam filling
- Number of wheels: 5 - Wheel option: 4 on transport axle and one on wing axle; 6 - Wheel option: 4 on transport axle and two on wing axle
- Standard transport axle: Spring-cushioned on center transport axle
- Axle fasteners: 1 1/4" Greasable pins
- Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
General
| Working Width | 13 ft. 6 in. |
| Width | 14 ft. 9 1/4 in. |
| Length | 17 ft. 6 in. |
| Weight | 5,620 lb. |
| Recommended HP | 70-160 HP |
