2024 Land Pride RCB5710

Call for Price

Call for Price

Key Features

Availability Brochure
Year2024
MakeLand Pride
ModelRCB5710

Product Features

Description

The RCB5710 Rotary Cutters are single wing mowers that are ideal for roadside mowing. The left-hand wing is replaced with a weight box on the RCB and the right-hand wing is replaced with a weight box on the RCBML models. This allows the operator to travel next to the road's shoulder, remaining on more level ground. All the features you love from our 15-foot cutters are there too, in a 10-foot single wing model!

Features and Benefits
  • Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity.
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Sliding guard for splitter gearbox: Sliding guard offers protection and easy access for improved efficiency of splitter gearbox maintenance.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 Piece driveline shields: Driveline grease zerks are easier to access.
  • Low hitch weight on tractor tongue: Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
  • Input driveline: Cat. 6 CV Driveline is matched just right for tractor capacity. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches Cat. 4 intermediate, Cat. 4 or Cat. 5 wing: Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Grease zerks on end caps of driveline: Intermediate and wing driveline cross journals are easier to grease.
  • 6" Blade overlap: Eliminates skipping during turns.
  • High blade tip speed: Allows clean cutting of material.
  • 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
  • Smooth top design: Reduces accumulation of debris and is easier and faster to clean.
  • Tops of decks are 100% welded: Makes center deck and wing deck stronger.
  • Replaceable 1/4" side skirt thickness: Increased thickness reduces damage from objects thrown into the side skirt.
  • Multiple center skid shoe locations: Run two or four skid shoes in locations under the tongue pivots or out at the wing hinges.
  • LED signal lights: LED lights are bright, long lasting, and resist vibration, unlike incandescent lights.
  • Beveled skid shoes on wing and weight box: Reduces gouging the ground when turning.
  • 1" Solid hinge rods: Larger diameter hinge rod provides greater strength in the hinge area.
  • Wing transport lock pin: Transport lock pin will hold wing in folded position in the event of hydraulic loss.
  • Enclosed dual 1" leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • Five-bolt hubs with larger bearings, five lip hub seals, and bolted-on hub caps: Makes the wheel assembly more durable and longer lasting. Five hub seals make it harder for water & debris to enter the hub and grease to leave the hub. Hub caps cannot be knocked off by foreign material
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • Replaceable individual wheel spindles: Spindles can be replaced when damaged without replacing entire axle assembly.
  • Wheel options Laminated tires: Eliminates flats.; Air-filled tires: Give better cushion while transporting.; Foam-filled tires: Give better cushion while transporting and can't go flat.
  • LP Performance HitchTM (Optional): One person Hook-up. Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar up to 12 degrees in both left and right directions.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Maintenance free tongue & axle pivots: Self lubricating journal bearings make for less maintenance.
  • Color-coded hydraulic hose handles: Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
  • Hydraulic hose holders: Tongue mounted hose holder keeps hose tips out of the dirt.
  • Greasable cast steel, continuous hinges: Cast steel hinges make a strong connection & are easy to lubricate.
  • Center axle options: HD Single suspension center axle: Spring cushion at the cylinder for cushion with least amount of moving parts.; Independent suspension wing axles: Offers additional suspension support on the wing axle.; Walking tandem center axle: Designed for versatility over a multitude of terrains.; Parallel pivot center axle: Provides unmatched ground contact for hill-like terrains.
  • Wing axle option: Independent suspension wing axle: Offers additional suspension support on the wing axle.; Walking tandem wing axle: Designed for versatility over a multitude of terrains.; Parallel pivot axle: Provides unmatched ground contact for hill-like terrains.
  • SMV Mounting Socket (Standard): SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer.
  • SMV Sign (Accessory): SMV sign is offered as an accessory when the tractor's SMV sign and mounting blade does not fit the cutter's standard SMV mounting socket.
  • Forged blade bar (Optional): Provides the critical strength needed for consistent, top performance
  • Wire harness 7-pin plug holder: Spring hose loop mounted holder keeps wire harness plug out of the dirt and rain
  • Hinged wing section: Allows the cutter to follow the terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Flip spacers: Easily change cut height with a flip of a spacer
  • Dual-acting fold cylinder (Optional): Allows for a narrow transport width of 7'-3" (2.21 m).
Specifications & Capacities
  • Engine horsepower range: 60 - 250 hp (44.7 - 186.4 kW)
  • Gearbox horsepower: 540 rpm or 1000 rpm; 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wing
  • Gearbox lubrication: Gear Lube 80-90W EP
  • Gearbox oil capacity: Splitter gearbox: 5.5 pints (2.6 L); Blade spindle gearboxes: 12.4 pints (5.87 L)
  • Cutting capacity: 5" (13 cm)
  • Machine weight: 5,740 lbs (2604 kg) Weight includes base unit, five 25.5" aircraft tires, HD single suspension center & wing axles, 540 CV Cat. 4 main driveline package, front & rear single chain guards, deck rings, single acting fold cylinders, constant level clevis hitch, and forged blade bars without bolt-on dishpans.
  • Tongue weight: 2,218 lbs (1006 kg) with the wing down. 2,302 lbs (1044 kg) with wing folded-up.
  • Blade tip speed At 540 rpm: Center Blades & Wing Blades = 16,400 FPM (83 mps)
  • Blade tip speed At 1000 rpm: Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)
  • A-frame tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.
  • Hitch types: Constant Level Swivel Clevis Hitch, LP Performance HitchTM, Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.
  • LP Performance Hitch & Bar- Tite hitch pivot shaft diameter: 2 1/4" (5.7 cm)
  • Hitch jack: Standard 7,000 lbs (3175.1 kg)
  • Signal lights: LED
  • Seven pin connector: SAE J560 pin configuration
  • Cutting width: 10'-5" (3.18 m)
  • Overall width: 11'-11" (6.3 m)
  • Transport width with 21" tires: 9'-1" (2.77 m) - Single-acting fold option, 7'-3" (2.21 m) - Dual-acting fold option.
  • Overall length: 16'-3" (4.95 m) - With center deck raised fully up.
  • Cutting height: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
  • Deck height: 12" (30.5 cm)
  • Lift hydraulics: 3 1/2" x 8" hydraulic cylinder, hoses, fittings & flip-over spacers.
  • Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground.
  • Wing hydraulics: 3" x 12" hydraulic cylinder, hoses & fittings.
  • Wing transport protection: Wing Transport Lock Pins.
  • Deck material thickness: Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)
  • Side skirt construction: Removable/replaceable 1/4" (6 mm) steel.
  • Deck ArmorTM option: 5/16" (8 mm) Steel plate
  • Wing Deck skid shoes: One leading hardened beveled skid shoe and one trailing standard beveled skid shoe.
  • Weight box skid shoes: One leading and one trailing hardened beveled skid shoes that are reversible/replaceable and one replaceable intermediate beveled skid shoe.
  • Center deck skid shoes: Two replaceable beveled skid shoes and multiple mounting locations.
  • Blades - 4 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift.
  • Blade overlap: 6" (15.2 cm)
  • Blade bolt: Keyed with hardened flat washer & locknut.
  • Stump jumper / blade holder options: Forged blade bar without the dish pan.; Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar.; Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate.
  • Front & rear guards: Optional single row chain or dual row chain.
  • Input driveline 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without over-running clutch.
  • Intermediate driveline: Standard - Category 5 with slip-clutch.
  • Wing driveline: Standard - Category 4 with slip-clutch or Category 5 with slip-clutch.
  • Number of wheels: 5 - Wheel option: Four on transport axle and one on the wing axle.; 6 - Wheel option: Four on transport axle and two on the wing axle.
  • Wheel options: 21" (53.3 cm) or 26" (66 cm) Laminated tires.; 24" (61 cm) Used aircraft, foam filled tires.; 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic.; 29" (73.7 cm) Used aircraft tires.
  • Transport axle: Many configurations to choose from.
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.
  • Lift hydraulics Wing: 3 1/4" x 8" Re-phasing hydraulic cylinder with hoses & fittings
  • SMV Sign (Accessory): SMV decal on galvanized steel back sign and plated or galvanized blade mount.

General

Working Width 10 ft. - 5 in. (3.18 m)
Width 11 ft. -11 in. (6.3 m)
Length 16 ft. - 3 in. (4.95 m)
Weight 5,740 lb. (2604 kg)
Recommended HP 60 - 250 HP (44.7 - 186.4 kW)

Shopping Tools