2024 Land Pride RC5014
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRC5014
Product Features
Description
The RC5014 -- Land Pride's largest offset folding rotary cutter -- makes quick work of roadsides 14-feet at a time. The offset allows the operator to travel next to the roadway in the same direction of travel as the traffic, increasing safety for the operator. The cutter features a heavy-duty Cat 6 driveline, heavy duty gearboxes, and a high blade tip speed for a clean, uniform cut in most highway mowing operations.
Features
- Surpassed industry safety standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ISO & ASABE.
- Factory assembled: Saves customer set-up time and money.
- 7 Year gearbox warranty (Years 6 & 7 Parts Only): Shows confidence in our gearboxes.
- Fully welded top deck: Fully welded deck adds strength.
- 250 hp (168.4 kw) divider gearbox, 225 hp (167.8 kw) spindle gearboxess: Rugged heavy built gearboxes capable of handling heavy cutting applications
- Gearbox seal protection: Gearbox bottom seal protection for longer bearing life
- Input driveline: Cat. 6 CV: Holds up to shock loads and harsh mowing conditions. Fits wide range of tractors including high horsepower tractors
- Star profile drivelines: Star profile spreads load out to many points on the shaft. More apt to resist bending and twisting under shock loads and harsh mowing conditions.
- Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles
- 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
- High blade tip speed: 540 rpm: Center: 17,377 fpm (88.3 mps), Wings: 17,329 fpm (88 mps); 1000 rpm: Center: 18,165 fpm (92.3 mps), Wings: 18,317 fpm (93.1 mps); Allows for a clean cut of material and even distribution.
- 6" (15.2 cm) Blade overlap: Generous blade overlap eliminates skipping, especially in turns
- High cutting capacity: Can cut brushy areas with saplings up to 3" (7.6 cm).
- 10 1/2" (26.7 cm) Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck
- 3/16" (5 mm) stump jumper (optional) backed with a 1" (1.5 cm) thick mounting bar: Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
- 10 gauge (3.4 mm) double deck: Heavy enough to handle conditions but not weigh unit down.
- Self-leveling pull-type hitch (optional): Reduces drawbar wear by keeping hitch level while going through ditches
- LED Signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
- Hinged wing section: Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
- Wing transport lock: Safety feature. Holds wing up in case of hydraulic pressure loss.
- 1" (2.5 cm) Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
- 1" (2.5 cm) Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
- Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
- 5" (12.7 cm) Square rear axle tubing: Heavy axle to handle harsh conditions.
- Spring-cushioned center-axle: Protects unit from bumps and ground shock.
- Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.
- Bar-tite hitch (optional): Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
- Wheel options - Laminated tires: Eliminates flats; Airplane tires without foam filling: Give better cushion while transporting; Airplane tires with foam filling: Give better cushion while transporting and can't go flat.
- Deck rings (optional): 1/2" (13 mm) x 3" (7.6 mm) Welded deck ring keeps blades from damaging the deck.
Specifications
- Gearbox horsepower: 250 (186.4 kw) Splitter 225; (167.8 kw) Center deck & wing deck
- Min. horsepower: 90 power take-off horsepower (67.1 kw)
- Gearbox lubrication & capacity: Center deck & wing: 10 pints (4.73 L) of gear lube 80-90W EP; Divider gearbox: 5.5 pints (2.60 L) of gear lube 80-90W EP
- Cutting capacity: Up to 3" (7.6 cm) material
- Machine weight: 7,340 lbs (3,329.4 kg)
- Blade tip speed At 540 rpm: Center blade: 17,377 FPM (88.3 mps) & wing blade: 17,329 FPM (88 mps)
- Tongue weight: 2,668 lbs (1,210.2 kg)
- Hitch types: Standard clevis hitch, pintle hitch, ball hitch, LP performance hitch and bar-tite hitch
- Hitch jack: Standard hand crank
- Signal lights: LED (standard)
- 7 Pin connector: SAE J560 pin configuration
- Cutting width: 13'-6" (4.11 m)
- Overall width: 15' (4.57 m)
- Minimum transport width: 8'-9" (2.44 m)
- Deck height: 10 1/2" (3.06 m)
- Overall length: 19'-3" (5.87 m)
- Cutting height*: 2" (5.1 cm) to 14" (35.6 cm) with hydraulic cylinder and stroke control spacers
- Lift hydraulics: 4" x 8" Hydraulic cylinder, hoses, fittings & stroke control spacers
- Wing transport protection: Wing transport lock
- Wing hydraulics: 3 1/2" x 12" Hydraulic cylinders, hoses & fittings
- Deck sheet thickness: 10g (3.4 mm) top and 10g (3.4 mm) bottom
- Side skirt thickness: 1/4" (6 mm)
- Center deck skid shoes: Replaceable
- Wing deck skid shoes: Replaceable
- Weight box skid shoe: Replaceable
- Blades - 4 (2 per carrier): 1/2" (13 mm) x 4" (10.2 cm) Heat-treated, free-swinging alloy steel with uplift
- Blade bolt: Keyed with hardened flat washer & locknut
- Blade overlap: 6" (16.2 cm)
- Blade holder: 1" (2.5 cm) diamond shaped blade bar
- Stump jumper: 3/16" (5 mm) Round dish shaped bolt-on stump-jumper (optional)
- Deck ring: 1/2" (13 mm) x 3" (7.6 cm) fully welded
- Heavy duty Input driveline options: Constant velocity u-joint ASAE Cat. 6 with or without over running clutch
- Front & rear guards: Single chain or double chain
- Heavy duty Intermediate & wing drivelines: ASAE Cat. 5 with slip-clutch protection
- Tire & wheel options: 6" x 21" Laminated tires; 6" x 26" Laminated tires; 27" x 7.75" x 15" Used aircraft tires with foam filling; 29" Used aircraft tires
- Number of wheels: 5 - Wheel option: 4 on transport axle and one on wing axle; 6- Wheel option: 4 on transport axle and two on wing axle
- Transport axle: Spring-cushioned on center transport axle or optional walking tandem on center axle
- Hubs: Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4" (4.4 cm) shafts
General
| Working Width | 13 ft. - 6 in. (4.11 m) |
| Width | 15 ft. (4.57 m) |
| Length | 19 ft. - 3 in. (5.87 m) |
| Weight | 7,340 lb. (3,329.4 kg) |
| Recommended HP | 90 power take-off horsepower (67.1 kW) |
