2024 Land Pride RC4614
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRC4614
Product Features
Description
Land Pride's single wing, 14-foot RC4614 Rotary Cutter, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.
Features
- Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
- Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
- 7 Year gearbox warranty: Shows confidence in gearbox integrity.
- 250 hp divider gearbox, 210 hp center & wing gearboxes: Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
- Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
- 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
- Input driveline: Cat. 6 CV: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
- Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
- 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
- High blade tip speed: Allows clean cutting of material & even distribution. See Specifications for actual fmp.
- 6" Blade overlap: Eliminates skipping during turns.
- Good cutting capacity: Can cut brushy areas with saplings up to 3".
- 13" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
- Stump jumper / blade holder: Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
- Spindle nut protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
- 10 gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
- 1/4" side skirt: Reduces debris piercing possibilities.
- Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
- Hinged wing section: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
- 1" Solid hinge rod: Larger diameter hinge gives greater strength to cutter and hinge area.
- Wing transport lock: Holds transport wing in the folded-up position in case of hydraulic pressure loss.
- Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
- 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
- Spring-cushioned center axle: Protects unit from bumps and ground shock, cushions loads on drawbar.
- Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wing.Helps prevent paint deterioration and rusting to the wheel rims.
- Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
- Rephasing lift cylinders: Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
- LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
- 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
- Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
- Roadway light kit option: Allows operator to transport on public roads safer when headlights are turned on and/or when flasher lights are turned on.
- Wheel options: Laminated tires: Eliminates flats.; Air-filled tires: Give better cushion while transporting.; Foam-filled tires: Give better cushion while transporting & can't go flat.
- Deck rings (optional): Keeps blades from damaging the deck.
Specifications
- Tractor horsepower: 70 to 250 hp
- Gearbox oil capacity: Divider gearbox: 6.2 Pints; Center deck, right-hand deck spindle gearboxes:4.7 Pints
- Gearbox horsepower: 250 hp splitter, 210 hp center & wing
- Gearbox lubrication: Gear lube 80-90W EP
- Cutting capacity: 3"
- Total machine Weight: 6,125 lbs. (Front & rear single chain guards, 5 AC tires, diamond blade bar with dishpan, without deck ring, CV driveline, and standard clevis.)
- Blade tip speed: Up to 17,000 fpm
- Hitch types: Optional self-leveling clevis hitch, LP performance hitch, bar-tite hitch, pintle hitch, or ball hitch
- Cutting width: 13' - 6"
- Hitch jack: Standard (7,000 lbs.)
- Overall width: 14' - 9 1/4"
- Minimum transport width: 9' - 2 3/4" (With cutting height at 2")
- Overall length: 17' - 8 1/2" (With cutting height at 2")
- Deck height: 13"
- Cutting height: 2" to 12"
- Center deck Lift hydraulics: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
- Right wing lift hydraulics: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
- Wing folding hydraulics: 3" x 12" single-acting hydraulic cylinder complete with hose & fittings.
- Wing flex: 45° up, 20° down while cutting.
- Side skirt material: 1/4" plate.
- Deck material: 1 - Piece, 10 gauge.
- Wing deck Skid shoes: Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe
- Center deck Skid shoes: Replaceable: 2 Skid shoes
- Weight box Skid shoes: Reversible & replaceable: 1 Skid shoe
- 4 Blades (2 per carrier): 1/2" x 4" Heat treated free swinging alloy steel with up lift.
- Blade overlap: 6"
- Blade bolt: Keyed with hardened flat washer & locknut.
- Stump jumper / blade holder: Standard: 1" thick diamond blade bar; Optional: 1" thick diamond blade bar with round dishpan
- Deck ring: Optional 3/8" formed and welded.
- Front & rear guards: Single chain or double chain.
- Input driveline: ASAE Cat. 6 with constant velocity u-joint.
- Intermediate & wing drivelines: Cat. 5 with slip-clutch
- Tire options: 6" x 9 x 21" Laminated tires; 27" x 7.75" Used aircraft tires with foam filling; 29" x 9" Used aircraft tires without foam filling
- Number of wheels: 5 - Wheel option: 4 on transport axle and one on wing axle; 6 - Wheel option: 4 on transport axle and two on wing axle.
- Standard transport axle: Spring-cushioned on center transport axle.
- Axle fasteners: 1 1/4" Greasable pins
- Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
- Colors: Standard color is Beige; Optional colors are Red, Green, or Orange
- Tongue weight: 2,220 lbs
General
| Working Width | 13 ft. 6 in. |
| Width | 14 ft. 9 1/4 in. |
| Length | 17 ft. 8 1/2 in. |
| Weight | 6,125 lb. |
| Recommended HP | 70-250 HP |
