2024 H&S Manufacturing S3231 Heavy-Duty Manure Spreader

$35,351.00

Overview

New/Used New

Availability In Stock

LocationMark's Tractor & Implement, Inc.

Stock # 8190

VIN xxxxxx1100

Condition Excellent

Product Features

Dealer Notes

Manure spreader 310 bushel

Description

Specifications

Capacity - Old Rating: 310 bu
Capacity Cu. Ft. Struck Level Per ASAE S324.2: 164.58
Capacity Cu. Ft. Heaped Per ASAE S324.2: 284.39
Top of Flare Width: 68" (173 cm)
Inside Width: 60" (152 cm)
Inside Length: 14' 10" (4.52 m)
Inside Depth: 28 ?" (72 cm)
Overall Width w/Standard Tires: 98" (249 cm)
Overall Length: 21' 11 ½" (6.7 m)
Overall Loading Height-Top Of Side: 51 ½" (131 cm)
Overall Height w/Hyd. Endgate: 55" (139.7 cm)
Diameter Of Beater: 29" (74 cm)
Main Apron Chain: T-Rod
Spindle Size: 2 ¼" (6 cm)
Standard Tire Size: 295 × 22.5 Recap
Weight w/Tires: 4,190 lbs. (1,901 kg)
Rear Hydraulic Endgate: Standard
PTO Speed: 540 - Standard | 1000 - Optional
Jack: Standard
Drive: 2-Speed
Front Splash Panel: Standard
Hyd. Cyl On Hyd. Endgate: 1 - Standard | 2 - Optional
Upper Beater: Optional

Options

Top Beater
Hydraulic Endgate Cylinder
Rear pan
Four 16.5X16.1 Tires/Wheels/Spindles/Hubs
Highway Lighting Kit
30,000# Safety Chain
Electric Controls For Hydraulic Drive
Variable Speed Hydraulic Drive

Key Features

Heavy 5" Channel Iron Frame
Solid Virgin Grade Poly Floor
T-Rod Main Apron
Hydraulic Endgate

Features

The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners.
Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5" U-channel side members. Compares with any on the market.
The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel.
Sides, front panel and both sides of the rear hydraulic endgate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up.
Solid virgin grade poly floor allows for considerably less torque to move a heavy load.
The two-speed apron drive is standard equipment.
The 29" diameter beater has two styles of replaceable beater paddles. Half of the 14 beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater-side wiper blades are also standard equipment.
The hydraulic endgate features a single cylinder with the hydraulic lines running through a 3" x 3" tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.
Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service.
Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt.
The beater drive gear box is 1:1.5 bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut-off.
The apron drive is a 50:1 bronze worm gear with shear bolt protection.
PTO Apron Low Speed/540 RPMs: 4' 8.5" per minute.
PTO Apron High Speed/540 RPMs: 8' 8.5" per minute
A front splash guard is standard equipment.
Greaseable bearings