2021 Gehl RT215 Track Loader

$54,500.00

$54,500.00

Overview

New/Used Used
Usage481.50 Hours
Availability In Stock
LocationDumont Implement
Stock # 5598
VIN xxxxxxxxxxx300668
Condition Good

Product Features

Description

Key Features
  • Rated Operating Capacity at 35% Tipping Load (kg): 2,150 lbs. (975)
  • Net Power (kW): 72 hp (54)
  • Lift Height (mm): 128" (3251)
Dimensions
  • Overall Operating Height - Fully Raised: 168 in.
  • Height to Hinge Pin - Fully Raised: 128 in.
  • Reach - Fully Raised: 34.5 in.
  • Dump Angle - Fully Raised: 39 deg.
  • Dump Height - Fully Raised: 98 in.
  • Maximum Rollback Angle - Fully Raised: 102.5 deg.
  • Overall Height at ROPS: 83.1 in.
  • Overall Length with Bucket - Standard Counterweight: 148.4 in.
  • Overall Length without Bucket - Standard Counterweight: 116.5 in.
  • Specified Height: 67.7 in.
  • Reach at Specified Height: 31.3 in.
  • Dump Angle at Specified Height: 75 deg.
  • Maximum Rollback Angle at Ground: 30 deg.
  • Carry Position: 8.2 in.
  • Maximum Rollback Angle at Carry Position: 31.6 deg.
  • Digging Position - Below Ground: +0.6 in.
  • Angle of Departure with Standard Counterweight: 29.2 deg.
  • Ground Clearance: 12.6 in.
  • Track Gauge: 51.7 in.
  • Track Shoe Width: 17.7 in.
  • Crawler Base: 58.4 in.
  • Overall Width - Less Bucket: 69.5 in.
  • Bucket Width: 73.9 in.
  • Clearance Radius - Front With Bucket: 94.6 in.
  • Clearance Radius - Rear with Standard Counterweight: 64.6 in.
  • Maximum Rollback at Specified Height: 66.8 deg.
  • Angle of Approach: 90 deg.
  • Grouser Height: 1 in.
Capacity
  • Operating Capacity at 35% Tipping Load: 2,150 lb.
  • Operating Capacity at 50% Tipping Load: 3,072 lb.
  • Tipping Load: 6,144 lb.
  • Operating Weight: 9,900 lb.
Engine
  • Make/Model: Yanmar/4TNV98TCT-NMSL Tier IV
  • Type: 4-Stroke Turbo
  • Displacement/Cylinders: 202 cu.in./4
  • Gross Power @ rpm: 72 hp @ 2500
  • Net Power @ rpm: 70.7 hp @ 2500
  • Peak Torque @ rpm: 217 ft.-lb. @ 1800
  • Oil Pump Capacity: 11 qts.
  • Alternator Voltage/Amperage: 14V/100A
Track Drives
  • Drawbar Pull/Tractive Effort: 12,133 lb.
  • Track Type/Track Rollers/Roller Type: Rubber/5/Steel
  • Track Width: 17.7 in.
  • Ground Pressure: 4.8 psi
Forces
  • Bucket Breakout - Tilt Cylinder: 6,631 lb.
  • Bucket Breakout - Lift Cylinder: 6,481 lb.
  • Ground Speed - Single Speed: 5.9 mph
  • Ground Speed - Two Speed: 8.8 mph
Volume
  • Fuel Tank: 24 gal.
  • Hydraulic Reservior Tank: 13.8 gal.
  • Coolant Capacity: 3.8 gal.
Hydraulics
  • Auxiliary Hydraulic Flow - Rated Speed: 21.8 gpm
  • Hight-Flow Hydraulic Flow - Rated Speed: 35.9 gpm
  • Transmission Pump Type: Axial Piston
  • Motor Type: Axial Piston with Planetary Gear Box Reduction
Electronic System
  • Battery Volts: 12V
  • Cold Cranking Amps at Temperature: 850 CCA @ 0 deg. F
Performance
  • The Gehl RT215 Compact Track Loader was designed from the ground up...
  • Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW)
  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Optional rear bumper/counterweight provides additional protection and towing capability.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Operator's Cabin
  • The extra-large, state-of-the art operator's station on the RT215 Track Loader is designed for optimal operator comfort resulting in more productivity.
  • Cab forward design enhances the view to the bucket.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Level II FOPS is standard equipment.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
Controls
  • Controls on the Gehl RT215 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.
  • Pilot controls provides the operator true 1:1 proportional control over the drive system.
  • All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
Engine Features
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • The RT215 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Hydraulics Features
  • The RT215 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.
  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Power track drive motors deliver superior pushing power.
  • Pilot Hydraulic transmission with direct engine coupling provides high operating efficiency while AntiStall technology keeps the power flowing.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Attachment System
  • The RT215 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.
  • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
  • All-Tach® system manually engages and disengages with a single lever.
  • Both systems are compatible with all universal-style track loader attachments.
Lift Arm
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • The robust lift-arm on the RT215 Compact Track Loader is designed for optimal strength, visibility and capacity.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Serviceability
  • Serviceability is very important to our customers. The RT215 is sure to exceed your service expectations.
  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.

Engine

Engine Type 4TNV98TCT-NMSL Tier IV
Engine Manufacturer Yanmar
Horsepower 72 hp
Rated RPM 2500 rpm
Fuel Capacity 24 gal.

General

SAE Rated Operating Capacity 3,072 lb. (50% Tipping Load)
Max Ground Speed 8.8 mph
Tire Size 17.7 in. Track
Length 148.4 in.
Width 69.5 in.
Height 83.1 in.
Weight 9,900 lb.

Shopping Tools